You are here: Online Store > Oils and Fuel Additives > Millers Oils, Fuel & Water Additives > CRX 80w90 Competition Semi Synthetic Gear Oil
CRX 80w90 Competition Semi Synthetic Gear Oil
£9.99 (Unit price exc. VAT)
Competition Semi-Synthetic Gear Oil.
* Synthetic base stocks in combination with shear stable viscosity modifiers, high quality extreme pressure additive and selected oil stocks.
APPLICATION:
* Use as received for lubrication of competition transmission systems.
* Suitable for overdrive gearboxes.
* Lubrication of rear axles and gearboxes.
* For plate type limited slip differentials use CRX LS 80W-90.
USER BENEFITS:
* Semi-synthetic formulation provides exceptional cold flow properties for easier gear changing and minimum power loss.
* Very good oxidation resistance and thermal stability maintain internal cleanliness in high temperature operating conditions.
* High film strength for maximum component protection, reduced friction, heat and wear.
* Suitable for use in older transmissions from 60's and 70's where 100% mineral oils would have been specified.
PERFORMANCE PROFILE:
* Meets or exceeds the performance standards
API MT-1 ]
API GL5 ] *
ZF [Gearboxes and differentials]
MIL-PRF-2105E
* Recommended for competition transmissions made by Hewland, Xtrac, Glebe Transmissions, ZF and all major car manufacturers.
*Note: For optimum results, run in new or rebuilt transmissions on Millers Classic Gearbox Oil 80W-90 before changing to CRX 80W-90.
TYPICAL CHARACTERISTICS:
Viscosity classification SAE 80W-90
Density @ 15oC 0.862
* Synthetic base stocks in combination with shear stable viscosity modifiers, high quality extreme pressure additive and selected oil stocks.
APPLICATION:
* Use as received for lubrication of competition transmission systems.
* Suitable for overdrive gearboxes.
* Lubrication of rear axles and gearboxes.
* For plate type limited slip differentials use CRX LS 80W-90.
USER BENEFITS:
* Semi-synthetic formulation provides exceptional cold flow properties for easier gear changing and minimum power loss.
* Very good oxidation resistance and thermal stability maintain internal cleanliness in high temperature operating conditions.
* High film strength for maximum component protection, reduced friction, heat and wear.
* Suitable for use in older transmissions from 60's and 70's where 100% mineral oils would have been specified.
PERFORMANCE PROFILE:
* Meets or exceeds the performance standards
API MT-1 ]
API GL5 ] *
ZF [Gearboxes and differentials]
MIL-PRF-2105E
* Recommended for competition transmissions made by Hewland, Xtrac, Glebe Transmissions, ZF and all major car manufacturers.
*Note: For optimum results, run in new or rebuilt transmissions on Millers Classic Gearbox Oil 80W-90 before changing to CRX 80W-90.
TYPICAL CHARACTERISTICS:
Viscosity classification SAE 80W-90
Density @ 15oC 0.862
- Copyright © 2007 - 2008 Cambridge Motorsport Parts Ltd.
- MSO.net